Table of Contents
Advertisement
8.1.2 Remote Control
Operation
Button
Timer
Button
Operation Mode
Selection Button
8.2.
Preparation before Operation
8.2.1 Before Operating The air
Conditioner
!
WARNING
Ensure that the power
plug is securely Inserted.
8.2.2 Notes
Aim at the signal receptor on the room air conditioner
when operating.
Do not drop or throw the remote control.
Do not place the remote control in a location that is
exposed to direct sunlight or next to a heating unit or
heat source.
Make sure that the signal path is not obstructed.
The maximum signal which is can be accepted are 3
metre.
If the unit is not going to be used for an extended
period of time, remove the power plug. Otherwise,
approximatelly 2.5W of electricity will be used even if
the unit has been tuned off using the remote control.
OPERATION
TEMP/
TIMER
SET/
TIMER
CANCEL
MODE
JET MODE
FAN SPEED
Panasonic
8.2.3 How to insert The batteries
8.2.4 About the Batteries
The batteries can be used for approximately one year.
Do not use rechargeable (Ni-cd) batteries, because such batter-
ies differ from the standard dry cell batteries in shape, dimen-
sions and performance.
Be sure to replacethe batteries with two new batteries of the
same type as each other.
Remove the batteries if the air conditioner is not going to be
used for an extended period of time.
- 11 -
Signal Transmitter
Timer/Room Temperature Setting Button
Set / Cancel Timer Button
Jet Mode Button
Fan Speed Button
Gently press the place marked
to slide the cover toward you.
Remove
the
1)
cover from the
back
of
the
remote control.
2)
Insert the two
batteries.
Fix the cover to
3)
the back of the
remote control.
Advertisement
Table of Contents
