Preparation Before Operation - Panasonic CS-MA95KE Service Manual

PREPARATION BEFORE OPERATION

Indoor Unit
4
Insert the air purifying filters
5
Insert the air filters
Notes
• If the unit is not going to be used for an extended period of time, turn off the main Power supply. If it is left at the ON
position, approximately 2.5 W of electricity will be used even if the indoor unit has been turned off with the remote
control.
• If operation is stopped, then restart immediately, the unit will resume operation only after 3 minutes.
Use under the following conditions
DBT: Dry Bulb Temp
WBT: Wet Bulb Temp
Maximum Temperature
Minimum Temperature
CS-MA95KE CU-MA185KE / CS-MA125KE CU-MA245KE / CS-MA75KE / CS-MA125KE CU-MA195KE
Ensure the power plug is securely inserted.
A loose plug may cause a fire or an electric shock.
6
Close the front panel
Cooling
Indoor Outdoor
DBT WBT DBT
32 23 43
16 11 16
41
!
Warning
1
Connect the power
supply cord to an
independent power
supply.
2
Open the front panel
3
Remove the air filters
Heating
Indoor
WBT
WBT DBT
_
26 30
_
11 16
(Unit in °C)
Outdoor
DBT WBT
24 18
-5 -6