Waldorf RN8110GE Installation And Operation Manual
800 series gas target top range / electric ovens
Hide thumbs
Also See for RN8110GE:
- Installation and operation manual (27 pages) ,
- Installation and operation manual (27 pages) ,
- Installation and operation manual (32 pages)
Related Manuals for Waldorf RN8110GE
Summary of Contents for Waldorf RN8110GE
-
Page 1: Electric Ovens
I n s t a l l a t i o n a n d O p e r a t i o n M a n u a l Gas Target Top Range / Electric Ovens RN8110GE RN8110GEC Date Purchased... - Page 2 MANUFACTURED BY Moffat Limited PO Box 10001 Christchurch New Zealand (03) 389 1007 Fax: (03) 389 1276 WORLD-WIDE BRANCHES UNITED KINGDOM Blue Seal 67 Gravelly Business Park Gravelly Park Birmingham West Midlands B24 8TQ (121) 327 5575 Fax: (121) 327 9711 UNITED STATES Moffat Inc 3765 Champion Blvd...
-
Page 3: Table Of Contents
Contents Waldorf Gas Target Top Electric Oven Range RN8110GE Gas Target Top / Electric Static Oven Range. RN8110GEC Gas Target Top / Electric Convection Oven Range. Introduction ....................2 Specification ....................3 Model Numbers Covered in this Specification General Gas Supply Requirements... -
Page 4: Introduction
Introduction We are confident that you will be delighted with your WALDORF Gas Target Top / Electric Oven Range, and it will become a most valued appliance in your commercial kitchen. To ensure you receive the utmost benefit from your new Waldorf appliance, there are two important things you can do. -
Page 5: Specification
Specifications Model Numbers Covered in this Specification RN8110GE Gas Target Top / Electric Static Oven Range - 900 mm. RN8110GEC Gas Target Top / Electric Convection Oven Range - 900 mm. General A commercial heavy duty, gas fired Target Top having a high output, two stage double-ring iron cast burner offering accurate temperature control and infinitely variable heat with the heat radiating out from the centre of the Target Top. -
Page 6: Electrical Supply Requirements
1-Phase Connection 3-Phase Connection MODEL 1P+N+E 3P+N+E 230-240V 400-415V L1 - 8.2 Amps 6.5 kW, RN8110GE 6.5 kW L2 - 9.2 Amps 26.6 Amps @ 235 V L3 - 9.2 Amps L1 - 9.5 Amps 6.8 kW, RN8110GEC 6.8 kW L2 - 9.2 Amps... -
Page 7: Dimensions
Dimensions Dimensions RN8110GE / GEC... -
Page 8: Installation
Waldorf Target Top / Electric Oven Ranges are designed to provide years of satisfactory service, and correct installation is essential to achieve the best performance, efficiency and trouble-free operation. -
Page 9: Clearances
Installation Components having adjustments protected (e.g. paint sealed) by manufacturer are only allowed to be adjusted by an authorised service agent. They are not to be adjusted by the installation person. NOTE: Do not obstruct or block the appliances flue. Never directly connect a ventilation system to the appliance flue outlet. -
Page 10: Gas Connection
Installation Gas Connection NOTE: ALL GAS FITTING MUST ONLY BE CARRIED OUT BY AN AUTHORISED PERSON. It is essential that the gas supply is correct for the appliance to be installed and that adequate supply pressure and volume are available. The following checks should therefore be made before installation:- a. -
Page 11: Electrical Connection
Installation Electrical Connection NOTE: ALL ELECTRICAL CONNECTIONS MUST ONLY BE CARRIED OUT BY AN AUTHORISED PERSON. WARNING: HIS APPLIANCE MUST BE EARTHED F THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED BY A SUITABLY QUALIFIED PERSON IN ORDER TO AVOID A HAZARD Each appliance should be connected to an adequately protected power supply and isolation switch mounted adjacent to, but not behind the appliance. -
Page 12: Commissioning
Installation Commissioning Before leaving the new installation; a. Check the following functions in accordance with the operating instructions specified in the ‘Operation’ section of this manual. • Light the Target Top Pilot Burner. • Light the Target Top Main Burner. •... -
Page 13: Operation
/ operator. Waldorf appliances have been designed to provide simplicity of operation and 100% safety protection. Improper operation is therefore almost impossible, however bad operation practices can reduce the life of the appliance and produce a poor quality product. To use this appliance correctly please read the following sections carefully:- •... -
Page 14: Lighting The Pilot Burner (Target Top)
Operation Lighting the Pilot Burner (Target Top) Remove centre casting with the casting removal tool. Depress the control knob and rotate anti-clockwise to the ‘PILOT’ position. With the control knob depressed, manually light the pilot burner located in front of the main burner. Hold in the control knob for approximately 10 to 15 seconds, then release. -
Page 15: Oven
Operation Oven DO NOT USE aluminium foil or trays directly on the cast iron sole plate(s). ! IMPORTANT NEVER block or cover the openings on each side of the sole plate(s). The oven is fitted with top and bottom elements. The thermostat maintains the overall oven temperature. -
Page 16: Cleaning And Maintenance
Cleaning and Maintenance AUTIO N Always turn ‘Off’ the electrical and gas supply before cleaning. This appliance is not water proof. Do not use water jet spray to clean interior or exterior of this appliance. General Clean the Target Top / Range regularly. A clean appliance looks better, will last longer and will perform better. -
Page 17: Periodic Maintenance
Cleaning and Maintenance Target Top a. This should be kept clean of any build up of spillage’s of food. Provided the cast iron work surface is regularly used it will maintain itself in good condition with no special cleaning requirements being necessary. b. -
Page 18: Fault Finding
Fault Finding This section provides an easy reference guide to the more common problems that may occur during the operation of your appliance. The fault finding guide in this section is intended to help you correct, or at least accurately diagnose problems with your equipment. Although this section covers the most common problems reported, you may encounter a problem not covered in this section. -
Page 19: Wiring Schematic
Wiring Schematic RN8110GE... - Page 20 Wiring Schematic RN8110GEC...
- Page 21 Wiring Schematic Wiring Layout for Static Oven Wiring Layout for Convection Oven...
-
Page 22: Gas Conversion And Specifications
Gas Conversion and Specifications Conversion Procedure AUTIO N Ensure that the appliance is isolated from the gas supply before commencing servicing. NOTE: • These conversions should only be carried out by qualified persons. All connections must be checked for leaks before re-commissioning the appliance. •... - Page 23 Gas Conversion and Specifications Pilot Burner Pilot Burner Main Burner To remove the pilot burner, disconnect the gas Injectors supply tube from the base of the pilot burner. Remove the bolt securing the retaining plate holding the pilot burner and thermo couple to the Gas Supply mounting bracket.
-
Page 24: Gas Regulator
Gas Conversion and Specifications Gas Regulator NOTE: The regulator supplied is convertible between Natural Gas and LPG, but it’s outlet pressure is fixed ex-factory and is NOT to be adjusted. NOTE, Pin rotated for Natural Gas NOTE, Pin rotated for LPG Fig 17 Ensure that the gas supply is turned ‘OFF’... -
Page 25: Gas Specifications
Gas Conversion and Specifications Gas Specifications - Australia / New Zealand Only Natural Gas LP Gas (Propane) Main Burner Injector (Inner Ring) Ø 1.70 mm Ø 1.10 mm Main Burner Injector (Outer Ring) Ø 2.60 mm Ø 1.55 mm Pilot Burner Injector 0.35 0.25 Burner Aeration Screw X (Inner) -
Page 26: Replacement Parts List
Replacement Parts List Replacement Parts List IMPORTANT: Only genuine authorized replacement parts should be used for the servicing and repair of this appliance. The instructions supplied with the parts should be followed when replacing components. For further information and servicing instructions, contact your nearest authorized service branch (contact details are as shown on the reverse of the front cover of this manual). - Page 27 Leg (150 mm) Adjustable. 229674 Rear Roller Assy. Accessories 228800 Ranges 900 mm Plinth Kit. Gas Conversion Kits Gas Type to Convert to Model Australia / New Zealand Only UK Only Nat. Gas Nat. Gas RN8110GE / GEC 231972 231971 231972 231971...
Need help?
Do you have a question about the RN8110GE and is the answer not in the manual?
Questions and answers