Confirm The Exasan Raid System Driver On Os; Confirming The Exasan Raid System Driver On Mac - Accusys ExaSAN User Manual

3.2.2 Confirm the ExaSAN RAID system driver on OS

After installing the ExaSAN RAID system HBA driver on the Mac host server, confirm the driver
has been properly installed with the following steps.
1. Click on About This Mac and lick on the More Info... button, then Click on the System
Report... button.
2. MacOS recognize ExaSAN as Fibre device, under the Hardware category, click on Fibre
Channel to bring up information. If HBA (or C1M) has been correctly installed, it will appear
a Fibre Domain. If there is a SAN volume, it will show as a SCSI logical unit
User Guide

3.2.2.1 Confirming the ExaSAN RAID system driver on Mac

3. Installation
Page 3-9