Create Array; Check On New Volume In Disk Utility Of Macos; Check On New Volume In Disk Management Of Windows; Check On New Volume By Fdisk Command On Linux - Accusys ExaSAN User Manual

3.3 Create Array

Array can be easily created by RAIDGuard X (refer to
LUN mapping (refer to
on OS, now, enjoy the high speed access to new ExaSAN Volume.

3.3.1 Check on new Volume in Disk Utility of MacOS

3.3.2 Check on new volume in Disk Management of Windows

3.3.3 Check on new volume by fdisk command on Linux

# fdisk -l
User Guide
Section: LUN mapping) is setup, and then volume should be appeared
Section: Creating an
3. Installation
Array). Make sure
Page 3-11