Add/Remove Controller - Accusys A12T3-Share User Manual

4.2

Add/Remove Controller

RAIDGuardX can manage the RAID controller locally or remotely via intranet access.
4.2.1 Add Controller
1. Open RAIDGuardX-Client, you may add controller by locally or remotely;
Locally: Click Add Controller to display a list of available controllers
Remote: Click Controller tab > Manual Add Controller, type the remote host IP address
(Where the RAIDGuard-Server installed is), click search to display all available controllers.
2. Click on a controller and enter password (default is 00000000, 8 zeros), then you can type a
controller name to remark, click Add to open main console
Note
Password can be changed in section Preference > MISC.
3. In main console, you can monitor and manage this RAID system.
4.2.2 Remove Controller
Click Remove Controller icon can remove this RAID system out of RAIDGuardX.
User Guide
5. RAID
Page 4-3