Accusys ExaSAN User Manual page 28

GUI RAIDGuardX Installation
Before installing RAIDGuardX, make sure the RAID HBA drivers is already installed in your
Linux OS.
1. You will need two source files; GS (RAIDGuardX Server) and GC (RAIDGuardX Client), you
can download from Accusys website: http://www.accusys.com.tw/support/download.html.
GS location: /{ExaSAN model}/GUI/Server/Linux.zip
GC location: /{ExaSAN model}/GUI/Client/x.x.x.zip
2. Create folder "Accusys", and unzip GS/GC files to subfolder GS and GC.
3. Perform GS, open a terminal console, and enter the following commands:
# cd /Accusys/GS/Linux/X.X.X
# chmod -R 777 SourceCode
# cd /Accusys/GS/Linux/X.X.X/SourceCode/
# ./make.sh
# cd /Accusys/GS/Linux/X.X.X/AP_Accusys/
# ./DTRGuiSrv_64
Note: Leave the GS terminal there and DON'T close it. Open another new terminal to
perform GC.
4. Perform GC, first to make sure the Java version is higher than 1.6, enter the following
commands:
# java –version
User Guide
3. Installation
Page 3-7