MSIC (Minimal Instruction Set Computer) has standard RAID controller CPU time settings. The
time of each event is displayed in the event logs in Event message.
Controller Time – Click this button to see a calendar and to change the time and date of the
controller.
Password – Enter the new controller password. The default password is 00000000 (8 zeros).
Type another 8 characters.
Password Confirmation – Confirm the new controller password.
Note:
Do not lose your password. If it is lost, you will have to contact your
agent or the Accusys Support Team.
SNMP Notification – Select SNMPv1 or SNMPv2 to send notifications for error conditions and
possible problems to the SNMP servers. SNMP stands for Simple Network Management
Protocol.
SNMP Target – Enter the IP address for sending the SNMP notifications.
Note:
The ExaSAN RAID system supports SNMP. It can set "System on IP
networks" and allows servers to manage the system remotely.
User Guide
4.1.6.7 MISC
5. RAID