Installing Driver And Gui On Linux - Accusys ExaSAN User Manual

Following procedures contain 2 procedures;

Driver installation

GUI RAIDGuardX installation
Driver Installation
You must have your Linux system with developmental environment and kernel source, in other
words you should select the adequate packages on the menu list during installation. Check
"Development Tools" Then click "Optional Packages" to select all packages when you install
your Linux OS.
1. Copy the ExaSAN RAID system driver files onto your desktop. Open a terminal window and
type the following commands to change the source files directory.
# cd 'root/Desktop/Linux_Drv_x.x.x
# make
# ls
Verify that driver ACS6x.ko has been compiled. If so, please type the following command
to install it.
# insmod ACS6x.ko
# lsmod
User Guide

3.2.1.2 Installing driver and GUI on Linux

3. Installation
Page 3-5