Table of Contents
Advertisement
4.3
Create/Delete an Array
This chapter will guide you how to use RAIDGuardX to create/delete disk array.
4.3.1
Create Array
1. Click icon Create Array, then create array page will pop up as below,
Note
1. Check LUN assign automatically and you can select host port.
2. You can change the setting of host port on Options > LUN connect.
2. Select the RAID level from the drop down menu. Available levels are: 0, 1, 5, 6, 0+1,
enhanced JBOD. Find more details in Chapter 5 RAID Overview
3. Select the sector size. Available sector sizes are 512 bytes (default) and 4096 bytes. The
sector size 4096 bytes is only used on WinXP for recognized over 2TB volume.
4. Click on the drive icon or Select all spare drivers to select all available drives.
User Guide
5. RAID
Page 4-4
Advertisement
Table of Contents
