Create/Delete An Array; Create Array - Accusys TShare A16T3-Share User Manual

5.3 Create/Delete an Array

This chapter will guide you how to use RAIDGuardX to create/delete disk array.

5.3.1 Create Array

1. Click icon Create Array, then create array page will pop up as below,
Note
1. Check LUN assign automatically and you can select host
port.
2. You can change the setting of host port on Options > LUN
connect.
2. Select the RAID level from the drop down menu. Available levels are: 0, 1, 5, 6,
0+1, enhanced JBOD. Find more details in Chapter 5 RAID Overview
3. Select the sector size. Available sector sizes are 512 bytes (default) and 4096
bytes. The sector size 4096 bytes is only used on WinXP for recognized over 2TB
volume.