Samsung SMARTCAM SNH-E6440BN User Manual page 58

4. Live Video
1. Tap the desired camera's [ ] or
Logout
tap the <Live> icon.

M
If there is the latest version of
test
firmware, when you make a live
test2
video connection, a pop up will
appear so that you can update your
camera's firmware.
Live
2. Enter the <Camera password>
Logout Logout Logout
for the camera selected. This is
the same camera password you
created at the time you registered
test test
|Enter the camera password.
the camera.
test2 test2
Within 20 seconds, it will start
Cancel
streaming.
Q W E
A S
Z
123
Camera Camera

M
According to the network service provider's policy, or the network
connection status, it may take a while to load.
Live Video
Camera List Refresh
Add Camera
Back
test
Event Playback Setup
Camera List Camera List Camera List Refresh Refresh Refresh
a b
Add Camera Add Camera Add Camera
Camera password
No.
OK
Manual
a
Recording
R T Y U I O P
b
Capture
D F G H J K L
X C V B N M
Two-way
c
Audio
space return
Setup Setup About About
d
HQ
e
Melody
Brightness
f
control
g
Flip control
h
Motion zone
c
test Back test
c d e f g h i j
Description
A user can manually save the video in the SD card.

If there is storage space of 10% while the SD card
overwrite function is not activated, you cannot perform
manual recording.
You can capture and save a still image from the video.
The microphone for two-way audio between cameras
and mobile devices is activated.

Refer to the bidirectional audio function.
In general network environments, high quality video is
provided.

Depending on the network status or service provider's
policy, HQ video may not be provided. In this case,
video is displayed for seven minutes.

In relay mode, no HQ video is provided. For more
details, refer to "Relay Mode".
The selected melody will be heard through the camera
speaker.
Adjusts the screen brightness.
Flips the video image.
It detects motion within the area set by the user.

Refer to the motion zone functions.
No. Description
A user can record audio and play the recorded audio
i
through the camera speaker.
Audio playing

You can record a max of 10 audio files.
j
Information Current audio/video information is displayed.
If you select <Night Vision> in general settings, IR lighting
IR Lighting
will operate for two minutes.

J
The supported functions may be different depending on the model.
Two-way Audio
Back test
1. Tap on the Two-way Audio icon.
2. The Mic icon will appear.
3. Talk while pressing down the mic icon. The voice can be
heard from the speaker on the camera. After finishing
talking, press down the icon for two seconds so that the
audio information will be transmitted through the network.
4. Even if you did not activate the two-way audio function,
you can receive the audio sound of the video. In addition,
the microphone setting should be at least 1 or higher if you
want to use the two-way audio function.

J
When there are multiple users logged on to the camera, first person
who tap the Talk icon will have the control.

While the bidirectional audio is on, you need to tap the bidirectional
audio icon again to cancel the function.

In relay mode, there is no audio. For more details, refer to "Relay
Mode".