Samsung SMARTCAM SNH-E6440BN User Manual page 48

Cable connection
7. Tap <Optional Setup>.
Is there a WiFi DIRECT sticker on
If yes, select Wireless Setup.
If not, select Optional Setup.
Wireless
Setup
Tap here to add registered camera
8. Tap <Next> after connecting
Registration
a camera according to the
instructions displayed on the
DCIN 5V DCIN 5V
screen.
2
Connect the camera to the WiFi
router using network cable.
Prev
9. Select the camera found and tap
Registration
Found camera(s).
<Next>.
Select the camera listed below and tap <Next>. If the
cameras are not listed, enter the camera serial
number manually.

M
When your smartphone is
C8BG6V2C801011T
connected to the same Wi-Fi
C8AT6V2C400079A
network as the camera, it will
KHNL6V2D70002KN
automatically search for the
camera.
SMART6411ADT003

Cameras already registered are not
searched.
Serial number
|Enter the 15-digit serial number.
Prev
10. If the camera is not detected,
please enter the camera serial
number manually.

M
the camera lens?
For camera's serial number
location, refer to [
Optional
Setup
11. Enter <Camera Name> and
<Camera password> and then
click <OK>.
1

M
Click <Show Password> to check
Plug in the power adapter
and connect it to the camera.
your password.
Camera can take up to 2
minutes to boot up.
3
Tap <Next> when the camera LED
changes to green.
(For *SNH-1010N, the power LED
turns to white)
Next
12. The camera registration is
completed.
Select <Yes> for a camera
setting.
Select <No> to view a live
screen.

M
Cameras may not be registered
depending on the settings of the
mobile device.
In this case, contact the service
center.
Next
Registration
No camera(s) found.
Check the serial number on the back of the camera
and enter it below.
]. Serial number
|Enter the 15-digit serial number.
Prev Next
1 2 3 4 5 6 7 8 9 0
q w e r t y u i o p
a s d f g h j k l
z x c v b n m
··· ···
? \
123
English(US)
. Done
Sym
Registration Registration
Found camera(s). Found camera(s).
Select the camera listed below and tap <Next>. If the Select the camera listed below and tap <Next>. If the
cameras are not listed, enter the camera serial cameras are not listed, enter the camera serial
number manually. number manually.
Create camera name and camera password. C8BG6V2C801011T C8BG6V2C801011T
Camera Name
C8AT6V2C400079A C8AT6V2C400079A
Example: Living Room
KHNL6V2D70002KN KHNL6V2D70002KN
Camera password
Use 1 - 8 numbers and/or letters
SMART6411ADT003 SMART6411ADT003
Confirm password
Show Password
Cancel OK
Serial number Serial number
|Enter the 15-digit serial number. |Enter the 15-digit serial number.
Prev Prev Next Next
Camera registered
successfully.
The camera settings can be set
to your preference. Continue
with the camera setup?
No Yes
3. Camera List
Camera Move
1. Move to the <Camera> item.
From the listed active cameras,
Camera
tap the desired camera's [ ] on
the right.
test

M
test2
You cannot monitor an inactive
camera.

For a Wi-Fi Direct camera, you can
set the wireless network by
selecting an inactive camera.
2. Live, Event, Playback and Setup
test
icons will be displayed.

J
The supported functions may be
different depending on the model.
Live
Delete Camera
1. To delete an added camera, tap
and hold the desired one from the Camera Camera
camera list, and tap <Delete>.
test test
Are you sure you want to remove this
camera?
Cancel
Setup About
Add Camera
test
Event Playback Setup
Setup Setup About About
Add Camera Add Camera
Delete