Samsung SMARTCAM SNH-E6440BN User Manual page 57

Cable connection
7. Tap <Optional Setup>.
Back
sticker on the camera lens?
If yes, select Wireless Setup.
If not, select Optional Setup.
Wireless
Setup
Tap here to add registered camera
8. Tap <Next> after connecting
Back
a camera according to the
instructions displayed on the
screen.
DCIN 5V DCIN 5V
2
Connect the camera to
the WiFi router using
network cable.
9. Select the camera found and tap
Cancel
<Next>.
Select the camera listed below and tap <Next>. If
the cameras are not listed, enter the camera serial

M
number manually.
Once the mobile device is
C8BG6V2C801011T
C8BG6V2C801011T
connected with the Wi-Fi network
C8AT6V2C400079A
like camera, it searches the camera C8AT6V2C400079A
KHNL6V2D70002KN
automatically.
KHNL6V2D70002KN

Cameras already registered are not
SMART6411ADT003
searched.
Serial number
Enter the 15-digit serial number.
10. If the camera is not detected,
please enter the camera serial
number manually.
Registration

M
Is there a WiFi DIRECT
For camera's serial number
location, refer to [
Optional
Setup
11. Enter <Camera Name> and
<Camera password> and then
click <Next>.
Registration Next

M
Click <Show Password> to check
1
your password.
Plug in the power adapter
and connect it to the
camera. Camera can take
up to 2 minutes to boot
up.
3
Tap <Next> when the
camera LED changes to
green.
(For *SNH-1010N, the
power LED turns to white)
12. The camera registration is
completed.
Select <Yes> for a camera
Registration Next
setting.
Found camera(s).
Select <No> to view a live
screen.

M
Cameras may not be registered
depending on the settings of the
mobile device.
In this case, contact the service
center.
Registration Next
Cancel
No camera(s) found.
Check the serial number on the back of the
camera and enter it below.
].
Serial number
Enter the 15-digit serial number.
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
return
123 space
Registration
Cancel Next
Create camera name and camera
password.
Camera Name
Example: Living Room
Camera password
Use 1 - 8 numbers and/or letters
Confirm password
Show Password
If you don't want to save camera
password, please go to settings to disable
"Save camera password".
Registration
Camera registered successfully.
The camera settings can be set to
your preference. Continue with the
camera setup?
No Yes
3. Camera List
Camera Move
1. Move to the <Camera> item.
Logout
From the listed active cameras,
tap the desired camera's [ ] on
the right.
test
test2

M
You cannot monitor an inactive
camera.

For a Wi-Fi Direct camera, you can
set the wireless network by
selecting an inactive camera.
Camera
2. Live, Event, Playback and Setup
List
icons will be displayed.

J
The supported functions may be
different depending on the model.
Live
Delete Camera
1. If you want to delete a registered
Logout Logout Logout
camera, slide it from right to left in
the camera list.
test test
2. Tap <Delete>.
3. Tap <OK>.
Are you sure you want to remove this
Cancel
Camera Camera
Camera List
Refresh
Add Camera
Setup About
test
test
Event Playback Setup
Camera List Camera List Camera List
Refresh Refresh Refresh
Add Camera Add Camera Add Camera
Delete Delete
camera?
OK
Setup Setup About About