Samsung SMARTCAM SNH-E6440BN User Manual page 56

Wi-Fi Direct connection

M
You can only use it in a camera that has a Wi-Fi Direct sticker
attached to it.

Press the button, "Tap here to add registered camera" when you
register a camera being used in another account, in order to register
it immediately without setting it.
7. Tap <Wireless Setup>.
Back
sticker on the camera lens?
If yes, select Wireless Setup.
If not, select Optional Setup.
Wireless
Setup
Tap here to add registered camera
8. Tap <Next> after connecting
Back
a camera according to the
instructions displayed on the
screen.
DCIN 5V DCIN 5V
2
When the camera LED
flashes in red, press the
WiFi button on the back
of the camera for 5
seconds.
9. On the next page, select WiFi
Back
Setting on the mobile device.
Go to Settings on your iPhone and select Wi-
Select a camera that has the last four digits
of the serial number displayed on the back of
(If password is requested, enter 'smartcam'.)
When you return to smartcam app, it will list the
available WiFi networks for the camera to connect to.
10. After selecting a camera to
connect, tap <Next>.

M
Select a camera that has the last
four digits of the serial number on
the back of the product.

Enter 'smartcam' if a password is
required.
Registration
Is there a WiFi DIRECT
cker on the camera le
yes select Wireless Se
11. Select a WiFi router connected to
your camera.
Optional
Setup
• : After entering the
password, connect to a WiFi
router.
Registration
Next
• : Without the password, you
1
will not be connected to a WiFi
Plug in the power adapter
router.
and connect it to the
camera. Camera can take
up to 2 minutes to boot
up.
• Other WiFi Networks : Enter the
SSID name, security type and
password.
If selected, it shows guide
on SSID and networking
procedures.
3
• Network password :
The status LED on the
camera will change to light
green/yellow. Tap <Next>
If you select a WiFi router with
the password, then the pop up
window will prompt you to enter
the password.
Registration
Fi.
the camera.
12. The LED of the camera will
Settings Wi-Fi
turn into green if a camera is
Wi-Fi
connected to Wi-Fi.
DIRECT-037N
M
CHOOSE A NETWORK...
Apple Network 8dfdc7
design
Cisco_WPS_57090
KT12580
Other...
Ask to Join Networks
13. Enter <Camera Name> and
Registration
Back
<Camera password> and then
Select the WiFi network you
click <Next>.
want the camera to connect to.
Apple Network 8dfdc7
M
design
Cisco_WPS_57090
KT12580
NETGEAR27
Other WiFi Networks
14. The camera registration is
Registration
Cancel Connect
completed.
Enter WiFi network password
Select <Yes> for a camera
setting.
Network password
Select <No> to view a live
Enter password
screen.
M
Q W E R T Y U I O P
A S D F G H J K L
Z X C V B N M
123 space Next
Registration

00 : 02
Camera's LED will blink in blue
while searching for a WiFi router.
If a connection is made to the WiFi
router, the LED will be blue Please wait until the status
LED on the camera changed
from blue to green.
consistently. After a short while,
It takes about 3 minutes.
while the camera is connecting to
the server, the LED will turn green.
Registration
Cancel
Create camera name and camera
password.

Click <Show Password> to check
Camera Name
your password.
Example: Living Room
Camera password
Use 1 - 8 numbers and/or letters
Confirm password
Show Password
If you don't want to save camera
password, please go to settings to disable
"Save camera password".
Registration

If you failed to register wirelessly,
Camera registered successfully.
please try again over a wireline.
The camera settings can be set to

your preference. Continue with the
Cameras may not be registered
camera setup?
depending on the settings of the
mobile device.
In this case, contact the service
No
center.
Next
Yes