Quick Start Guide for iOS Setup
Before you begin your SmartCam Setup, please:
Have your SmartCam and power adapter ready.
Have your iOS device available to download the SmartCam app.
Make sure you are within range of the same Wi-Fi network you'll use for
Record your Wi-Fi network password here:_________________________
For more information about the user manual, the mobile app manual or the FAQ,
please visit www.samsungsmartcam.com.
If you have questions or need any help related to the installation of the SmartCam,
refer to the help list in the mobile app information menu or contact our technical
Product Views For Setup
Use the following diagrams to familiarize yourself with the camera setup features:
1) MicroSD Card Slot (up to 128GB)
2) Power/Wi-Fi Status LED, Mic
5) Wi-Fi Direct Button
3) Power Input
6) Reset Button
For a more detailed diagram, please refer to the User's Manual.
The initial camera registration can only be performed using the mobile app.
You can also access all functions at www.samsungsmartcam.com, including camera
settings, live monitoring and playing back recorded videos.
Create User Account
Please follow these easy steps to create a user account, before setting up
Tap "Create new
Go to the App Store
Search for "Samsung
Open the app.
from your iPhone or
install the app.
Enter user ID,
Tap "Next" to
Record Your SmartCam User Account Information Here:
USER ID: ______________________
USER PASSWORD: ____________
A combination of 8-14 alphanumeric letters
A combination of 10-14 alphanumeric letters
Example: johnsmith or johnsmith12
iOS Wireless Camera Setup
Continue with camera setup by following the app wizard instructions.
Connect the power
Exit SmartCam app
and follow the on-
by pressing the
to set up Wi-Fi
done, click "Next".
Go to the "Settings"
Turn on your Wi-Fi,
In the SmartCam
on your iPhone/iPad,
and pick the network
app, select your
and tap "Wi-Fi".
ending in the last 4
characters of your
number. If a password
is required, enter
"Settings" and return
to the SmartCam app.
Enter your home
When the LED light
Create a name
turns green on the
for your camera.
password and tap
camera, you will
(Name: 1-20 letters
directed to Step 9.
letters and numbers)
To setup your
Select your Time
Enable motion and/
Zone and then tap
or audio detection to
receive event alerts
on your devices.
You have successfully completed the SmartCam setup!
Camera Setup Information:
CAMERA NAME: __________
CAMERA PASSWORD: _________
1-20 alphabetic letters and/or numbers
1-8 alphabetic letters and/or nubmers
Example: kitchen or kitchen123 or 123
Example: room or room123 or 123
SmartCam Control Guide
Once setup is complete and live video appears on your iOS device, tap
the screen to display the SmartCam tool bar to customize your SmartCam
experience. The table below is reference information for the Search Screen
f g h i j
1. Phone recording
The user can save the video in <Manage saved video clips> in Settings
2. SD Save
Tap to save streaming video onto the SD card
Tap to capture and save a still image during monitoring
4. Two-Way Talk
Tap to begin and end Two-Way Talk between mobile device and camera
4A. Microphone Button
To talk, press and hold the mic button on the screen, release to listen
It displays the video resolution that is currently connected. Please tap to change the
5. Selecting a resolution
Tap to view and choose melody selection to play through camera
7. Brightness Control
Tap to adjust screen image brightness
8. Flip Control
Tap to flip screen image vertically or horizontally
Tab to detect a motion in a specific area (up to 3 areas).
9. Motion Zone Select
If the motion detection function is activated, any motion can be detected, without even
setting the motion zone.
You can output any voice message recorded via the camera speaker (up to 10
10. Voice Recording