Monitoring Options - Samsung SMARTCAM SNH-E6440BN User Manual

Monitoring options

a b c
n
m
l
k
Item
a
Default Camera Set the default camera to monitor in the camera list.
b
Delete Camera Delete the registered camera.
Cancel remembering
c
Cancel remembering the camera password.
camera password
If Night Vision is set <ON>, it will automatically switch to black
and white mode in the dark condition and then the IR lamp will
d
Night Vision automatically operate.
If Night Vision is set <OFF>, it does not switch to night vision mode
and it will operate in color mode.
e
Motion zone setting It detects motion within the range set by a user.
18 · English
d
e
f
g
h
i
j
Description
Item
f
Flip You can flip over the video image.
A user can directly save videos in their SD card.
`
If there is an ongoing event now or overwrite to SD card is not
checked, and there is storage space of 10% remaining, you
g
cannot perform manual recording.
Manual recording
`
If you move the page or turn off the browser without turning off
the manual recording button, it will be saved for a max of 30
seconds and manual recording will be finished.
Set the network speed (low/mid/high).
`
h
If the bandwidth provided by your internet service provider is smaller
Network Speed
than the recommended value, then the video might get fuzzy or
temporary disconnections or delays in the live video may be caused.
i
Capture Image Live video is saved as one image.
When enabled, you can hear what's happening around the camera.
`
Audio is only recorded in the micro SD card when the microphone
j
is connected to the main body.
Sound
`
Some internet service providers do not support audio outputs in
relay mode.
The video is displayed on the full screen.
`
k
Full screen The system supports Internet Explorer only.
`
If you double-click the screen, the full screen mode is terminated.
l
Brightness You can adjust the brightness of the screen image.
Hide/unhide detailed
m
Click on the [
menu
Adjust the volume of the microphone and speaker connected to the
camera. (The microphone and speaker are sold separately.)
If you set the mic to zero, you will hear no live sounds or audio events.
n
Audio
NO recording will be done in the SD card.
Note that the Two-way audio transfer function is available only with the
smart phone application.
Description
] icon to unhide or hide detailed setting menu.