Assembly
1.
Match the grooves of main body and bracket.
2.
Turn the screw to [CLOSE] using something that is not sharp (for example a
coin), to fasten the main body and bracket.
`
Turn the screw to [Open] to separate the main body and bracket.
Camera installation
1.
Select the location to install the camera.
2.
Mount the camera on a wall or ceiling
using the enclosed installation screw.
Connecting the camera to the main body
Connect camera cable to the [CAM] terminal on the side of the main body.
Adjusting camera angle
Adjust the lens to face the desired area to monitor.
02
9