Playback - Basics; Playing Back Tape - Sony DCR-TRV38E Service Manual

— Playback – Basics —

Playing back tape

You can monitor the recorded tape on the LCD screen. If you close the LCD panel, you
can monitor the playback picture in the viewfinder. You can also control playback using
the Remote Commander supplied with your camcorder.
(1) Set the POWER switch to VCR while pressing the small green button.
(2) Press OPEN to open the LCD panel.
(3) Press
(4) Press
(5) Adjust the volume following the steps below.
2
38
to rewind the tape.
to start playback.
1 Press FN to display PAGE1.
2 Press VOL. The screen to adjust volume appears.
3 Press – (to turn down the volume)/+ (to turn up the volume).
4 Press OK to return to PAGE1.
3
5
–
VOL
The bar indicator
4
OK
+
1
VCR
OFF(CHG)
CAMERA
MEMORY/
NETWORK