Advertisement
Quick Links
Download this manual
See also:
Service Manual
DCR-TRV38
DCR-HC65
1. Lens cap
2. Internal speaker
3. LCD/touch panel screen
4. OPEN button
5. LCD backlight
6. REC. start/stop
7. RESET (all setting return
to default)
8. [ignore]
Media Loan
The Evergreen State College
Recycled & Recyclable
Sony DCR-TRV38 & DCR-HC65
9. Power zoom lever
10. DISPLAY/BATT info
1. EASY button
12. Viewfinder
13. "Memory Stick" slot
14. Access lamp
15. Battery pack
16. [ignore]
17. DC IN jack
The Library Group
http://www.evergreen.edu/media/ml/
Operating Guide for
1. Shoe cover
2. Flash (for DCR-HC65
3. Lens
4. Microphone (internal)
5. Camera recording lamp
Olympia, WA 98505
Proficiency Required
6. Remote sensor
7. Intelligent accessory
8. Focus ring
9. Focus button
10. Back light button
(360) 867-6253
sonypalmcoRdeRs/10.01.07/jw
Advertisement
Related Manuals for Sony TRV38 - MiniDV 1Megapixel Camcorder
Summary of Contents for Sony TRV38 - MiniDV 1Megapixel Camcorder
- Page 1 Operating Guide for Sony DCR-TRV38 & DCR-HC65 Proficiency Required DCR-TRV38 DCR-HC65 1. Shoe cover 6. Remote sensor 9. Power zoom lever 1. Lens cap 2. Flash (for DCR-HC65 7. Intelligent accessory 2. Internal speaker 10. DISPLAY/BATT info 3. Lens 8. Focus ring 3.
- Page 2 gENERAL PRECAuTIONS There are two ways to power the camcorder: As with any sensitive piece of equipment, care battery or AC Adaptor. should be taken when using digital camcorders. Do not expose this equipment to rain or moisture. POWERINg WITH THE AC ADAPTOR To avoid damage to the internal parts of the EVF Open DC In jack cover, insert DC cable into place.
- Page 3 CASSETTE INSERTION & REMOVAL STEADYSHOT Select steadyshot from the MENu for hand-held 1. Slide the TAPE EJECT or OPEN/EJECT switch to shot to compensate for camera shake. In the case open the Cassette Compartment cover (located on of excessive camera shake, steadyshot will not bottom of camera).
- Page 4 MENu SETTINgS To change the mode settings in the menu settings, select the menu items with up/down. The default settings can be partially changed. First, select the icon, then the menu item and the mode. The POWER which should be set to CAMERA, VCR, or MEMORY. Operate by touching the panel. 1.