Sony DCR-TRV38E Service Manual page 184

Changing the menu settings
Icon/item
OTHERS
DATA CODE
(On the Remote
Commander)
AREA SET
DST SET*
BEEP
COMMANDER
DISPLAY
* Instead of DST, SUMMERTIME appears on the screen for some models.
Note
If you press DISPLAY/BATTERY INFO with DISPLAY set to V-OUT/LCD in the menu
settings, the picture from a TV or VCR will not appear on the LCD screen even when
your camcorder is connected to the output jacks on the TV or VCR.
176
Mode Meaning
z DATE/CAM To display date, time and various settings during
playback when you press DATA CODE on the
Remote Commander (p. 39)
DATE To display date and time during playback when
you press DATA CODE on the Remote
Commander
—— Temporarily change the area where you are using
your camcorder
z OFF Not during daylight saving time
ON During daylight saving time
z MELODY To output the melody when you start/stop
recording or when an unusual condition occurs
on your camcorder
NORMAL To output the beep instead of the melody
OFF To cancel melody, the beep sound and shutter
sound
z ON To activate the Remote Commander supplied
with your camcorder
OFF To deactivate the Remote Commander to avoid
remote control misoperation caused by other
VCR's remote control
z LCD To show the display on the LCD screen and
viewfinder
V-OUT/LCD To show the display on the TV screen, LCD screen
and viewfinder
POWER
switch