Sony DCR-TRV38E Service Manual page 154

Connecting your camcorder to a computer using the USB cable
(For Windows users)
Viewing images recorded on the "Memory Stick"
(1) Insert the "Memory Stick" into your camcorder.
(2) Connect the AC Adaptor, then set the POWER switch to MEMORY.
(3) Connect the
(4) Follow the on-screen messages so that the Add Hardware Wizard recognizes
You cannot install the USB driver if the "Memory Stick" is not in your camcorder
Be sure to insert the "Memory Stick" into your camcorder before installing the USB
driver.
146
(USB) jack on your camcorder to the USB port on the computer
using the supplied USB cable.
The USB MODE indicator appears on the LCD screen of your camcorder. The
computer recognizes your camcorder, and the Add Hardware Wizard starts.
that the USB drivers have been installed. The Add Hardware Wizard starts
two times because two different USB drivers are installed. Be sure to allow the
installation to complete without interrupting it.
(USB) jack
USB port
USB cable (supplied)