Sony DCR-TRV38E Service Manual page 90

Dubbing only desired scenes – Digital program editing (on tape)
To return to FN
Press
Notes
•When you complete step 3, the image to adjust the synchronization is recorded for
about 50 seconds.
•If you start recording from the very beginning of the tape, the first few seconds of the
tape may not be recorded properly. Be sure to allow about 10 seconds' lead before
starting the recording.
•When the recording unit cannot be operated properly by the i.LINK cable, leave the
connection as it is, and make the A/V connecting cable settings (p. 78). Video and
audio are sent by digital signals.
82
2
V I DEO ED I T
ED I T SET
CONTROL
RETURN
ADJ TEST
"CUT - I N" EXECUTE
"CUT -OUT"
I R SETUP ENGAGE
REC PAUSE
PAUSEMODE
I R TEST
EXEC
6
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N" 0
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
EXEC
END to return to PAGE1, then press EXIT.
3
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
RET.
8
END
V I DEO ED I T
ED I T SET
CONTROL
ADJ TEST
"CUT - I N"
"CUT -OUT"
I R SETUP
PAUSEMODE
I R TEST
RET.
END
COMPLETE
EXEC RET.
END
0
EXEC RET.