Table of Contents
Advertisement
Pocket Camera SG560-8M
settings, when the user complete the settings, it requires to unplug the control to enter
into normal use, that is, if the wired control still be connected with the camera, the
camera will not work. The camera (the control must be unplugged when in ON mode)
will take pictures or videos automatically according to the default settings or preset
customer settings.
3.4 Enter into the TEST Mode
Connect the wired control, then switch to the ON position and enter into the TEST
mode. There are some functions in TEST mode: Customer settings, manual capture and
preview. The control is needed in this mode.
3.4.1 Customer Settings
Press MENU on the control to enter into menu settings. The camera can be taken
over control to manually customize the camera settings which display on the LCD screen
on the camera or external TV monitor. The detailed operations will be described in
"Advanced Operations" chapter.
3.4.2 Manual Capturing
The TV-in connector should be unconnected, and then press SHOT to manually
capture photos or record videos. It is also SHOT key to stop the manual capturing of the
video.
3.4.3 View Images or Videos
There are two ways to view the captured images or videos:
1. LCD screen on the control
2. TV monitor which connect to camera with TV cable
Press OK to view images, the latest image will be shown in the LCD screen on the
control or TV monitor. Press UP to view the previous image and press DOWN for the next.
Please note that video cannot be played in the LCD screen and only thumbnail of the
video is showed.
The detailed operations like deleting images or videos will be described in "Advanced
Operations" chapter.
3.5 Power Off
Switch the camera to OFF position to power off the camera. Please note that even in
the OFF mode, the camera still consumes certain power at μA level. Therefore, please
remove the battery if the camera will not be used for a long time.
3 Quick Introductions
6
Page
Hide quick links:
Advertisement
Table of Contents
