Maintenance; Limited Warranty - Marley R1500 Installation & Maintenance Manual

R series and rt2 series fan forced wall heaters

Hide thumbs

Table of Contents

Available languages

MAINTENANCE

TO CLEAN HEATER: The heater should be cleaned annually for

maximum efficiency or more often if used in dirty environment.

Before cleaning be sure power is off and heater is cool. First,

remove knob by pulling straight out, then remove front grille and

clean blower wheel using a vacuum cleaner with a brush

attachment. The grille may be cleaned with a slightly damp rag

if desired.

OPERATIONAL NOTICE

Your heater is equipped with an automatic reset limit control that

will automatically turn the heater OFF to prevent a fire if the

heater overheats. Should this occur, the red warning light will

illuminate and will continue to shine until the limit resets.

CAUTION

THE ILLUMINATED RED WARNING LIGHT SIGNIFIES THE HEATER HAS

BEEN SUBJECTED TO SOME ABNORMAL CONDITION CAUSING IT TO

OVERHEAT. CHECK HEATER TO INSURE THAT IT HAS NOT BEEN

BLOCKED IN ANY MANNER (IF SO, REMOVE BLOCKAGE). IF THERE IS

NO INDICATION OF BLOCKAGE IT IS RECOMMENDED THE HEATER BE

CHECKED BY A REPUTABLE ELECTRICIAN OR REPAIR SERVICE TO

INSURE THE HEATER HAS NOT BEEN DAMAGED. DO NOT CONTINUE TO

USE HEATER IF LIGHT IS ON.

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of

installation, except heating elements which are warranted against defects in workmanship and materials for five years from date of installation. This

warranty does not apply to damage from accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate

voltage; nor to equipment improperly installed or wired or maintained in violation of the product's installation instructions. All claims for warranty work

must be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred

to return products to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the

nearest Marley authorized service center or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge

to you with return freight paid by Marley. It is agreed that such repair or replacement is the exclusive remedy available from Marley Engineered

Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE

HEREBY DISCLAIMED AND EXCLUDED FROM THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR

CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT

LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise

returned to the factory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products.

When requesting return authorization, include all catalog numbers shown on the products.

HOW TO OBTAIN WARRANTY SERVICE AND

WARRANTY PARTS PLUS GENERAL INFORMATION

1. Warranty Service or Parts

2. Purchase Replacement Parts

3. General Product Information

Note: When obtaining service always have the following:

1. Model number of the product

2. Date of manufacture