Maintenance Instructions - Marley CZ1512T Installation, Operation & Maintenance Manual

Fan-forced wall heaters

Hide thumbs

Table Of Contents

Table of Contents

Available languages

3. Turn circuit breaker on, reset thermostat to desired setpoint,

and verify the heater is operating normally.

4. If the heater malfunctions again and shuts off, disconnect

power at the circuit breaker and have the heater inspected by

a qualified electrician.

CAUTION - DO NOT CONTINUE TO ATTEMPT TO USE THE

HEATER IF THE SAFETY CONTROL REPEATEDLY OPER-

ATES AFTER BEING RESET. TO DO SO COULD PERMA-

NENTLY DAMAGE THE HEATER OR CREATE A FIRE OR

SAFETY HAZARD.

Special Note: In addition to the over-temperature safety control,

this heater is provided with a back-up thermal fuse (one shot)

that will permanently shut the heater off if for some reason

the over-temperature safety control should not function as

intended. If this thermal fuse activates, the heater will not

reset and must be repaired by a qualified repair person.

MAINTENANCE

INSTRUCTIONS

It is important to keep this heater clean. Your heater will give you

years of service and comfort with only minimum care. To assure

efficient operation follow the simple instructions below.

ALL SERVICING BEYOND SIMPLE CLEANING THAT

REQUIRES DISASSEMBLY SHOULD BE PERFORMED BY

QUALIFIED SERVICE PERSONNEL.

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except heat-

ing elements which are warranted against defects in workmanship and materials for five years from date of installation. This warranty does not apply to damage from acci-

dent, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or maintained

in violation of the product's installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products

to Marley Engineered Products Service Center. Within the limitations of this warranty, inoperative units should be returned to the nearest Marley authorized service cen-

ter or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that

such repair or replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM

THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE PRODUCT,

WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives

you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the fac-

tory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization,

include all catalog numbers shown on the products.

HOW TO OBTAIN WARRANTY SERVICE AND

WARRANTY PARTS PLUS GENERAL INFORMATION

1. Warranty Service or Parts

2. Purchase Replacement Parts

3. General Product Information

Note: When obtaining service always have the following:

1. Model number of the product

2. Date of manufacture

3. Part number or description

LIMITED WARRANTY

1-800-642-4328