Control Method Of Clearance After Adjustment; Check The Clearance With Your Finger - Nilfisk-ALTO POSEIDON 2-29 Repair Manual

Micro switch adjustment (Continued)
Check of data according to "Technical data" Page 4.
After the adjustment the data in the "Technical data" Page 4 must be verified by letting the ma-
chine run high pressure for two minutes according to "Technical data" Page 4

Control method of clearance after adjustment:

Check the clearance with your finger:

Check the clearance between key and micro switch (green), which can be felt by moving the
arm backwards and forwards, by a light touch guiding movement from your finger (yellow ar-
row), (When doing this check, the lid will normally be on the micro switch box.)
Fig. 1: To visualize the function inside the micro switch box.
Fig 2: Check the clearance with your finger.
Service / Repair.
21
Fig. 1
Fig. 2
D