Service/Repair; Dismounting/Mounting Of Front Cabinet - Nilfisk-ALTO POSEIDON 2-29 Repair Manual

Dismounting / mounting of front cabinet.
1. Remove the 2 torx 20 screws from the hose reel (Fig 1)
2. Loosen the 2 torx 20 screws from the bottom of the machine and push them completely
in. (Fig 2)
NOTE: No electrical tool allowed to loosen the 2 screws from the bottom, as the thread /
slider can be damaged if too high torque is used.
The front cabinet can now be removed.
Note: press cabinet before tightening screw!
Fig. 1
Fig. 2
Service / Repair.
7
D