Contents 1 Important safety instructions .....................34 2 Description 2.1 Purpose ................36 2.2 Operating elements ..............36 3 Before starting the washer 3.1 Setting up the washer ............37 3.2 Connecting the high pressure hose ........37 3.3 Connecting the water supply ..........37 3.4 Electrical connection ............38 4 Operation 4.1 Connecting the spray lance to the spray handle ....38 4.2 Switching on the washer ............38...
Page 3
1 Important safety instructions Symbols used to mark Before using the This symbol is instructions high-pressure used to mark sa- washer, be sure fety instructions to also read the that must be ob- enclosed opera- served to prevent ting instructions and keep them damage to the within reach at all times.
Page 4
CAUTION! Never operate the washer Maintenance and repair High-pressure water jets can without water. Even brief shor- be dangerous if misused. The tages of water result in severe CAUTION! jet must not be directed at per- damage to the pump seals. Always remove the plug from sons, animals, live electrical the mains plug socket before...
2 Description Purpose This high-pressure washer has Always use the washer as been designed for professional described in these operating use within instructions. Any other use may damage the washer or the sur- – Trade face to be cleaned or may result –...
3 Before starting the washer Setting up the washer 1. Before using the washer for the fi rst time, check it care- fully to detect any faults or damage. Max. 2. In the event of any damage Min. contact your dealer immediately.
Electrical connection 1. Observe safety instructions in chapter 1. 2. Put the plug into the electri- cal socket. 4 Operation Connecting the spray 1. Pull the blue quick-release lance to the spray grip (A) of the psry handle handle forwards and lock it by turn- ing it to the left.
5 After using the washer Switching off the 1. Turn the main switch to posi- washer tion »0«. 2. Close water tap. 3. Activate the spray handle until the washer is depres- surised. 4. Lock the safety catch on the spray handle.
6 Maintenance Maintenance plan Every six months After the fi rst 50 Weekly or 100 operating As required operating hours hours 6.2.1 Cleaning water inlet fi lter 6.2.2 Checking pump oil level 6.2.3 Changing pump oil Maintenance work A water filter is fitted on the 6.2.1 Cleaning water inlet water inlet to prevent large par- filter...
7 Troubleshooting Fault Cause Remedy Pressure drop > Air in the system • Vent the system by operating the spray handle several times at short intervals. If necessary, operate the washer for a short time without the high-pressure hose connected. >...
Conformity EU Declaration of Conformity Product: High Pressure Washer Type: Poseidon 2-24 Portable, Poseidon 2-26 Portable Description: 400 V 3~, 50 Hz - 230 V 1~, 50 Hz - IP X5 EC Machine Directive 98/37/EEG The design of the unit corresponds to...