Wear Components - ESAB Migmaster 280 Pro Instruction Manual

Migmasterr 280 Pro

Wear components

Item Denomination
A Pressure roller
B Feed roller
C Inlet nozzle
D Insert tube
E Outlet nozzle
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for
aluminium wires MUST be used. It is recommended to use 3m long welding gun for
aluminium wires, equipped with appropriate wear parts.
wMMP280
Ordering no. Notes
0455 907 001
0367 556 001 Ø .023--.030/.035" (0.6--0.8/0.9mm) Fe, Ss, cored wire.
0367 556 002 Ø .030/.035--.040/.045" (0.8/0.9--1.0/1.1mm) Fe, Ss, cored wire.
0367 556 003 Ø .040--3/64" (1.0--1.2mm) Fe, Ss, cored wire.
0367 556 004 Ø .035/.040--3/64" (0.9/1.0--1.2mm) Al wire.
0349 312 497 Ø .035--.045" Fe, Ss, cored wire.
0466 074 001
0455 894 001 Plastic, must be used together with item 0455 885 001,
for welding with Al wire.
0455 889 001 Steel, must be used together with item 0455 886 001.
0455 885 001 Must be used together with item 0455 894 001,
for welding with Al wire.
0455 886 001 Must be used together with item 0455 889 001.
- - 45 - -
Edition101118