Removing The Bezel Assembly; Installing The Bezel Assembly - IBM BladeCenter T 8720 Installation And User Manual

Removing the bezel assembly

Complete the following steps if you are removing the bezel assembly from the front
of the BladeCenter T unit:
1. Forcefully pull forward on the blue touch points at the top sides of the bezel.
2. Lift the bezel assembly up and out of the BladeCenter T unit. Carefully set the

Installing the bezel assembly

Complete the following steps if you are installing the bezel assembly at the front of
the BladeCenter T unit:
1. Insert the bottom bezel hooks into the bezel slots at the bottom of the
2. Push in the bottom and the top of the bezel assembly until they both lock firmly
28
BladeCenter T Types 8720 and 8730: Installation and User's Guide
Bezel touch point
bezel assembly aside in a safe location.
BladeCenter T unit.
into place.
ES D