Codec C90 Configurations - Cisco PrecisionHD 1080p 12X User Manual

Cisco TelePresence PrecisionHD Camera
Contents Introduction

Codec C90 configurations

HD-SDI HDMI 1
Using the camera with Codec C90
Basic setup
Connect the HDMI cable:
•
From the HD VIDEO OUT (HDMI) connector on the camera.
•
To the HDMI 1 (HDMI ) connector on the Codec C90.
Connect the camera control cable:
•
From the CODEC CONTROL IN (RJ45) connector on the
camera.
•
To the CAMERA CONTROL (RS–232) connector on the
Codec C90. Visca™ protocol is supported.
Other configurations
The HDMI <1..4> and HD-SDI <1..4> connectors can be
used for the camera. The HDMI and HD-SDI can be used
simultanously.
Connect the HD-SDI cable:
•
From the HD-VIDEO OUT (HD-SDI) connector on the
camera.
•
To the HD-SDI <1..4> connector on the Codec C90.
D14640.04 PrecisionHD 1080p-720p Camera User Guide
© 2010-2011 Cisco Systems, Inc. All rights reserved.
The physical interface
Camera
control
, July 2011
.
Connecting the camera Connecting the camera Video output formats
11
PrecisionHD Camera User guide
Daisy chaning Appendices
Codec connectors
1 Output connector
Input connector
1
www.cisco.com