Table of Contents
Advertisement
Contents
4.2 - Commissioning
7.2.2 - Level 1 programming (ON-OFF functions)
7.2.4 - Level 2 programming (adjustable parameters)
1.
General warnings
3
1.1 -
Safety warnings
3
3
4
CAUTION!
4
- This manual contains important safety instructions and
4
warnings. Incorrect installation could lead to serious injury.
4
Before starting, please read all sections of the manual care-
6
fully. If you are unsure about something, stop installation
6
immediately and contact KING-gates Customer Service for
6
assistance.
6
- Important: please retain this manual for future maintenance
6
work and product disposal.
8
1.2 -
Installation warnings
8
9
• Before beginning the installation procedure, check that this prod-
uct is suitable for the intended use (see sections 3.1 and 3.2). If
9
unsuitable, do NOT proceed with installation.
10
The contents of this manual refer to an installation like the one
11
shown in fig. 1.
11
• Taking into account the hazards which could occur during in-
stallation and product operation, the automation system should be
11
installed according to the following procedure:
12
- Ensure there is a system device which is a means of disconnec-
12
tion from the supply mains. This device must have a contact sepa-
12
ration in all poles which ensures full disconnection under overvolt-
12
age category III conditions.
12
- All installation and maintenance operations must be carried out
12
with the automation system switched off and the power supply dis-
13
connected. If the disconnection device is not visible from where the
13
automation system has been installed, a sign must be attached to
13
it before attempting any work. The sign should read: "CAUTION!
13
MAINTENANCE WORK IN PROGRESS".
14
- The product must be connected to a power supply line equipped
14
with safety grounding system.
14
- Take care not to crush, bang, drop or spill any kind of liquid on
14
the automation system during installation. Do not keep the product
14
close to sources of heat or open flames. Doing so may damage it,
corrupt it or lead to hazardous situations. If this were to happen,
14
stop installation immediately and contact KING-gates Customer
15
Service.
15
- Do not make alterations to the product in any way. Improper use
16
can only lead to malfunctions. The manufacturer declines all liability
16
for damage caused by arbitrary modifications to the product.
17
- This product is not intended for use by people (including children)
17
with reduced physical, sensory or mental capabilities or who lack
17
experience and knowledge, unless they have been given supervi-
18
sion or instruction concerning the use of the product by a person
18
responsible for their safety.
18
- The product is not intended as an intruder protection system. Ad-
18
ditional devices must be installed alongside the automation system
19
to guarantee effective protection.
19
- Do not allow children to play with the fixed control devices. Keep
19
remote control devices out of their reach as well.
20
- The automation system must not be used until it has been com-
21
missioned as described in chapter 5 ("Testing and commissioning").
22
- The packing materials of the product must be disposed of in com-
pliance with local regulations.
1
Hide quick links:
Advertisement
Table of Contents
