Installing An Optional Card - Yamaha 01v 96 Service Manual

01V96

INSTALLING AN OPTIONAL CARD

Follow the steps below to install an optional mini-YGDAI
card.
1 Make sure that the power to the 01V96 is turned off.
2 Undo the two fixing screws and remove the slot
cover, as shown below.
Keep the cover and fixing screws in a safe place for
future use.
3 Insert the card between the guide rails and slide it
all the way into the slot, as shown below.
You may have to push firmly to fully insert the card into
the internal connector.
4 Secure the card using the attached thumbscrews.
Tighten the screws firmly to secure the card. Otherwise,
the card may not be grounded cor-rectly.
32