Yamaha 01v 96 Service Manual page 5

Digital Input
(2TR IN DIGITAL, ADAT input)
Option Input (SLOT)
Input Channel CH1–32
Stereo Input Channel CH1–4
OSCILLATOR
STEREO OUT
Available cards
Optional digital interface cards (MY16, MY8, MY4 series)
Input patch
—
Phase
Normal/reverse
On/off
*3
Gate-type
Key in: 12 ch Group (1–12, 13–24, 25–32)/AUX1–8
On/off
*4
Comp-type Key in: self /Stereo Link
Pre EQ/pre fader/post fader
Attenuator
–96.0 to +12.0 dB (0.1 dB step)
4-band PEQ (TYPE1)
EQ
On/off
Delay
0–43400 samples
On/off
—
Fader
100 mm motorized (INPUT/AUX1–8)
On/off
Aux send
AUX1–8; pre fader/post fader
On/off
Solo
Pre fader/after pan
Pan
127 positions (Left= 1–63, Center, Right= 1–63)
127 × 127 positions
Surround pan
[(Left= 1–63, Center, Right= 1–63)], [(Front= 1–63, Center, Rear= 1–63)]
LFE level
–∞, –96 dB to +10 dB (256 step)
Routing
STEREO, BUS1–8, DIRECT OUT
Direct out
Pre EQ/pre fader/post fader
Displayed on LCD
Metering
Peak hold on/off
Input patch (L/R) —
Phase (L/R)
Normal/reverse
Attenuator (L/R)
–96.0 to +12.0 dB (0.1 dB step)
Equalizer
4band PEQ (TYPE1)
On/off
—
100 mm motorized
Fader
INPUT/AUX1–8 send
On/off
Aux send
AUX1–8; pre fader/post fader
On/off
Solo
Pre fader/after pan
Pan (L/R)
127 positions (Left= 1–63, Center, Right= 1–63)
127 × 127 positions
Surround pan
(L/R)
([Left= 1–63, Center, Right= 1–63] x [Front= 1–63, Center, Rear= 1–63])
LFE level (L/R)
–∞, –96 dB to +10 dB (256 step)
Routing
STEREO, BUS1–8, DIRECT OUT
Displayed on LCD
Metering
Peak hold on/off
Level
0 to –96 dB (1 dB step)
On/off
—
Waveform
Sine 100 Hz, sine 1 kHz, sine 10 kHz, pink noise, burst noise
Routing
BUS1–8, AUX1–8, STEREO L/R
24-bit linear, 128-times oversampling (@fs=44.1, 48 kHz), 64-times over-
DA converter
sampling (@fs=88.2, 96 kHz)
*5
*5
01V96
5