Yamaha 01v 96 Service Manual page 131

2.8.3.20 Parameter request (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
0000ffff 0f attribute
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
2.8.3.21 Parameter change (Function call response:
attribute)
Transmission
When an attribute is modified as a result of receiving a parameter change from
Studio Manager, the result of execution will be transmitted as the following pa-
rameter change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 01010100 54
attribute
0000ffff 0f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
result HH
DATA 0eeeeeee ee
result HL
0eeeeeee ee
0eeeeeee ee result LH
result LL
0eeeeeee ee
End of exclusive
EOX 11110111 F7
2.8.3.22 Parameter change
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, the patch link data of the specified scene will be modified.
Transmission
In response to a request, a Parameter Change message will be transmitted on the
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
inpatch
DATA 0iiiiiii ih
0iiiiiii il
outpatch
0ooooooo oh
0ooooooo ol
End of exclusive
EOX 11110111 F7
function
SCENE LIB LINK 0x20 0-99(0:response only)
2.8.3.23 Parameter request
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
Refer to the above table for the Functions and Numbers.
STATUS
ID No.
SUB STATUS 0011nnnn 3n
GROUP ID
MODEL ID
ADDRESS
EOX
2.8.3.24 Parameter change (Function call response: link)
Transmission
When link data is modified as a result of receiving a parameter change from Stu-
dio Manager, the result of execution will be transmitted as the following param-
eter change.
STATUS
ID No.
SUB STATUS 0001nnnn 1n
GROUP ID
MODEL ID
ADDRESS
DATA
EOX
2.8.3.25 Parameter change (Function call: pair , copy)
(Function call: link)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified channel.
STATUS
ID No.
SUB STATUS 0001nnnn 1n
GROUP ID
MODEL ID
ADDRESS
DATA
EOX
PAIR ON with COPY
PAIR ON with RESET BOTH
PAIR OFF
*1) 0:CH1 – 31:CH32, 128:BUS1 – 135:BUS8, 256:AUX1 – 263:AUX8,
512:STEREO
Effect is 0:Effect 1–3:Effect 4
• In the case of PAIR, you must specify channels for which pairing is pos-
sible.
number • In the case of PAIR ON with COPY, you must specify Source Channel
as the copy source, and Destination Channel as the copy destination.
(Function call: link)
System exclusive message
11110000 F0
Manufacture's ID number (YAMAHA)
01000011 43
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
00111110 3E
Universal
01111111 7F
Function call
00010100 14
0010ffff 2f link
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
11110111 F7
System exclusive message
11110000 F0
Manufacture's ID number (YAMAHA)
01000011 43
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
00111110 3E
Universal
01111111 7F
Function call
01010100 54
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
result HH
0eeeeeee ee
result HL
0eeeeeee ee
result LH
0eeeeeee ee
0eeeeeee ee result LL
End of exclusive
11110111 F7
System exclusive message
11110000 F0
Manufacture's ID number (YAMAHA)
01000011 43
n=0-15 (Device number=MIDI Channel)
MODEL ID (digital mixer)
00111110 3E
Universal
01111111 7F
Function call Pair
00010001 11
function
0000ffff 0f
Source channel H
0sssssss sh
Source channel L
0sssssss sl
Destination channel H
0ddddddd dh
Destination channel L
0ddddddd dl
End of exclusive
11110111 F7
function
0x00 *1)
0x01 *1)
0x02 *1)
01V96
channel
131