Safety Precautions - Emerson XC1008D Installing And Operating Instructions

1. GENERAL WARNING
1.1 Please read before using this manual
This manual is part of the product and should be kept near the instrument for easy and quick

reference.
 The instrument shall not be used for purposes different from those described hereunder. It
cannot be used as a safety device.
Check the application limits before proceeding.

1.2

Safety Precautions

Check the supply voltage is correct before connecting the instrument.

 Do not expose to water or moisture: use the controller only within the operating limits avoiding
sudden temperature changes with high atmospheric humidity to prevent formation of
condensation
Warning: disconnect all electrical connections before any kind of maintenance.

 The instrument must not be opened.
In case of failure or faulty operation send the instrument back to the distributor or to "DIXELL

s.r.l." (see address) with a detailed description of the fault.
Consider the maximum current which can be applied to each relay (see Technical Data).

 Ensure that the wires for probes, loads and the power supply are separated and far enough
from each other, without crossing or intertwining.
Fit the probe where it is not accessible by the end user.

 In case of applications in industrial environments, the use of mains filters (our mod. FT1) in
parallel with inductive loads could be useful.
1592021021 XC1008-1011-1015D GB A5 r.1.5A 12.10.2009 XC1008-1011-1015D 4/66