Installation I N A Mobile Home - HearthStone Phoenix 8612 Owner's Manual

I I A M
NSTALLATION N
Follow these special requirements for installing your
stove in a mobile home.
•
Install the stove in accordance with 24 CFR, Part
3280 (HUD)
•
Permanently attach the stove to your mobile
home's floor. Use the 1/4" holes or notches in
each leg base to bolt down the stove.
•
Install one of the following Dura-Vent Mobile
Home Chimney & Connector Kits:
6DP-MH 6" Diameter S/N 9096N
7DP-MH 7" Diameter S/N 9196N
8DP-MH 8" Diameter S/N 9296N
Each kit includes:
Stainless spark arrester cap, storm collar,
Adjustable vented flashing – 0/12 –
two 24" Dura/Plus* chimney pipes, 24"
support box with built-in starter section and
trim.
* (UL or ULC approved equipment is acceptable)
•
You must remove the exterior chimney sections
when transporting Mobile Home.
▌
WARNING:
DO NOT INSTALL IN A ROOM USED FOR
SLEEPING.
▌
CAUTION:
MAINTAIN THE STRUCTURAL INTEGRITY OF
THE MOBILE
CEILING, AND ROOF WHILE YOUR STOVE IS
INSTALLED, AND IN USE.
H
OBILE OME
HOME WALLS, FLOOR,
Hearthstone Quality Home Heating Products, Inc ®
www.hearthstonestoves.com
Chimney Cap
Chimney Section
Storm Collar
Adjustable Roof
6/12,
Typical Mobile Home Installation.
Chimney is supported by Ceiling.
Flashing
Support Box
with built-in
Starter section
Stovepipe
Phoenix Model 8612
17