Park And Pickup; Default Display; Use Park And Pickup - Aastra Clearspan 6757i User Manual

6.4.1

Park and Pickup

The Call Park feature allows you to park a call so that any member of the group can retrieve it.
A call can be parked against any number in the group, including your own number.
You can only have one call parked at a time.
A 45-second timer is started when you park a call. If the timer expires and your line is idle, the
system rings your line. If you line is not idle, the timer is restarted for 10 seconds and the call
remains parked. This procedure is repeated until your line is idle, or the parked call is retrieved or
released.
6.4.2

Default Display


The Park softkey is visible only when a call is connected.
 The Pickup softkey is visible only the phone is idle or when the phone is off hook.
6.4.3

Use Park and Pickup

Step Action
Park a Call:
From a connected call:
1.
Press the Park softkey.

2.
Or


3.
Or

Pick up a Parked Call:
Lift the handset.
1.
Press the Pickup softkey.
2.

3.
Or

___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD.
Dial the number where you want to
park the call plus the
Dial to park the call against
your number.
Hang up the handset.
Press the Goodbye key.
Dial the number where the call was
parked plus the key.
Dial to pick up a call parked
at your own number.
Result
The feature access code for Park is
dialed and you hear instructions given by
the system.
If the call is parked successfully, you hear
the message "Your call has been Parked.
Thank you."
key.
The Pickup softkey appears.
You hear the instructions given by the
system.
You are connected to the parked call.
AASTRA - 2788-003
PAGE 71 OF 116