5.4.2
Lock Symbol
The lock symbol indicates your call is secure within the phone system.
Services
Callers
Spd 100
L1
Mary Jones
1003
Drop
Conf
Xfer
Figure 6 Lock Symbol
5.4.3
Calls on Hold
If Phone A places the call on hold, it can be retrieved by Phone B by pressing the key of the
red flashing lamp on Phone B. (Phone B does not have a Pickup softkey at this time because it
does not have control of the call.)
When Phone B takes control of the call, the line lamp changes to green and the display
changes to reflect the details of the connected call. Phone A immediately returns to the off-
hook display or the idle state display and the red status lamp on that line indicates Phone B
has control of the call.
5.5
Callers List and Redial List
For inbound calls answered by Phone A, Phone B does not show any details of the call on the
screen, but does display "1 Missed Call", and the call is stored in the
call. The opposite applies if the call was answered by Phone B.
For outbound calls originated by Phone A, nothing is stored in the
because Phone A originated the call. The opposite applies if the call is placed by Phone B.
5.6
Handle Calls Using the Speaker
The Speaker allows you to speak to someone without using the handset or headset. The
option for your phone is set to "Speaker" by default.
Step
Action
Dial using the speaker:
Press the Speaker key and enter a number from dial tone.
1.
Answer a call using the speaker:
Press the Speaker key or the line appearance key.
1.
___________________________________________________________________________________________
CS 6757i IP PHONE USER GUIDE V3.2.2
CLEARSPAN® IS A REGISTERED TRADEMARK OF AASTRA TECHNOLOGIES LTD.
DND
Weather
More
John Smith
02:42
More
Callers List
as a missed
Redial list
on Phone B
Set Audio
AASTRA - 2788-003
PAGE 60 OF 116