Aastra 6735i Series Release Notes page 26

Additional Information
Parameter –
recording beep direction
Description
Format
Default Value
Range
Example
Transport Protocol for SIP Services Settings
Parameter –
sip services transport protocol
Description
Format
Default Value
Range
Example
Parameter –
sip services port
Description
Format
Default Value
Range
Example
24
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies where the periodic beep tone (notifying users that their call
is being recorded) should be played.
Integer
1 (Network)
0-2
0 (Local)
1 (Network)
2 (Both Local and Network)
recording beep direction: 2
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the transport protocol used for SIP services.
By default, this parameter is set to -1 (invalid) whereby SIP services
use the same transport protocol as defined in the "sip transport
protocol" parameter.
Numeric
-1 (Invalid)
-1 (Invalid)
0 (TCP/UDP)
1 (UDP)
2 (TCP)
sip services transport protocol: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies the port used for SIP services.
Numeric
5060
Greater than 1024 and less than 65535
sip services port: 7300
RN-001037-03 REV14 – 04.2014