Aastra 6735i Series Release Notes page 15

Notes (continued):
• Hard keys 8, 9, and 10 can be remapped to any key type except for the following:
Line, BLF, BLF/List, Auto Call Distribution, and BLF/Xfer.
• If a hard key is configured with the type "None", functionality of the hard key (and
its corresponding LED) is disabled.
• Misconfiguration of the hard key will result in the key going back to its default
function. For example, reprogramming hard key 3 (Redial) to
hardkey3 type: line
hardkey3 line: 33
will result in hard key 3 reverting back to its default Redial functionality as the
"hardkey3 line: 33" definition is invalid.
Reprogramming Hard Key Functionality Using the Configuration Files
Use the following parameters to reprogram the functionality of hard keys:
Parameter –
hardkeyN type
Description
RN-001037-03 REV14 – 04.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
The type of key to which you would like to change the hard key. Valid
types include:
• none - Indicates no setting for the key.
• line - Indicates the key is configured for line use.
• speeddial - Indicates the key is configured for speeddial use. You
can configure a key to speeddial a specific number by pressing that
key. Optionally, you can also configure a Speeddial key to dial prefix
numbers. With this option, the prefix numbers automatically dial
when you press the key, and the phone waits for you to enter the
remaining numbers to dial.
Note: When there is an active call, the Speeddial keys send DTMF
digits through the active voice path. To dial out, you have to first
put the active call on hold and then press the Speeddial key.
• dnd - Indicates the key is configured for Do Not Disturb on the
phone.
• blf - Indicates the key is configured for Busy Lamp Field (BLF) use.
• list - Indicates the key is configured for BLF/List use.
• acd - Indicates the key is configured for Auto Call Distribution. The
ACD feature allows the applicable call manager to distribute calls
from a queue to registered IP phone users (agents).
• xml - Indicates the key is configured to accept an XML application
for accessing customized XML services. You can also specify an XML
softkey URL for this option.
• flash - Indicates the key is set to generate a flash event when it is
pressed. The IP phone generates flash events only when a call is
connected and there is an active RTP stream (for example, when
the call is not on hold).
Additional Information
13