Additional Information
The following parameters can be used to reprogram the hard keys:
Configuration Parameter Description
hardkeyN type
10
The type of key to which you would like to change the hard key. Valid types
include:
•
none - Indicates no setting for the hard key.
•
line - Indicates the hard key is configured for line use.
•
speeddial - Indicates the hard key is configured for speeddial use.
•
dnd - Indicates the hard key is configured for do not disturb on the phone.
•
blf - Indicates the hard key is configured for Busy Lamp Field (BLF) use.
•
list - Indicates the hard key is configured for BLF/List use.
•
acd - Indicates the hard key is configured for Auto Call Distribution. The
ACD feature allows the applicable call manager to distribute calls from a
queue to registered IP phone users (agents).
•
xml - Indicates the hard key is configured to accept an XML application for
accessing customized XML services. You can also specify an XML softkey
URL for this option.
•
flash - Indicates the hard key is set to generate a flash event when it is
pressed. The IP phone generates flash events only when a call is connected
and there is an active RTP stream (for example, when the call is not on
hold).
•
sprecode - Indicates the hard key is configured to automatically activate
specific services offered by the call manager. For example, if the sprecode
value of *82 is configured, then by pressing the softkey, *82 automatically
activates a service provided by the server.
•
park - Indicates the hard key is configured to park incoming calls when
pressed.
•
pickup - Indicates the hard key is configured to pick up parked calls when
pressed.
•
lcr - Indicates the hard key is configured for the Last Call Return function
when pressed.
•
callforward - Indicates the hard key is configured for accessing the Call
Forward features on the phone. A Call Forwarding Mode must be enabled
to use this key. "Account" mode is the default.
•
blfxfer - Indicates the hard key is configured to transfer calls AND config-
ured for BLF on a single key.
•
speeddialxfer - Indicates the hard key is configured to transfer calls AND
configured for speeddialing to a specific number.
•
speeddialconf - Indicates the hard key is configured to be used as a
Speeddial key AND as a Conference key.
•
directory - Indicates the hard key is configured to access the Directory.
•
callers - Indicates the hard key is configured to access the Callers List.
•
redial - Indicates the hard key is configured to access the Redial List.
•
conf - Indicates the hard key is configured as a Conference key.
RN-001037-03 REV14 – 04.2014