Aastra 6735i Series Release Notes page 20

Additional Information
Parameter –
hardkeyN ring splash
Description
Format
Default Value
18
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
When a key is configured for BLF functionality, this parameter controls
the ring splash alert pattern per key. The following alerting patterns
are available:
• Silence (ring splash off ).
• Normal splash (same as current BLF ring splash).
• Normal - delayed (After a delay of (x) seconds, the normal ring
splash is played).
• Periodic (similar to the normal ring signal that is used by the phone
itself. The actual ring melody is based on the current melody set for
the line where the BLF key is associated to).
• Periodic - delayed (after a delay of (x) seconds, the ring signal that is
used by the phone is played - see above).
• One low volume splash (same as the current BLF ring splash but at
a lower level to be less intrusive).
• One low volume splash - delayed (after a delay of (x) seconds, the
ring signal that is the same as the current BLF ring splash is played
at a lower level).
When a key is configured for BLF/List functionality, this parameter
controls the ring tone per key. The following ring tones are available:
• Ring tone 1
• Ring tone 2
• Ring tone 3
• Ring tone 4
• Ring tone 5
• Silence (ring tone off )
Note:
Ring tones are based on the current ring tone set configured on the IP
phone.
Integer
For BLF
0 (Silence)
For BLF/List
105 (Silence)
RN-001037-03 REV14 – 04.2014