Aastra 6735i Series Release Notes page 25

RTP/SRTP Packet Destination Authentication Whitelist Settings
Parameter –
recording destinationN
(N is a number from 1 to 6)
Description
Format
Default Value
Range
Example
Recording Indicator (Periodic Beep Tone) Setting
Parameter –
recording periodic beep
Description
Format
Default Value
Range
Example
RN-001037-03 REV14 – 04.2014
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies trusted IP addresses (maximum of six) corresponding to the
destination where the RTP/SRTP packets should be sent. The IP phone
will check to see if the destination IP addresses are trusted before
sending the duplicated RTP/SRTP packets.
Note:
If all of these parameters are left undefined, no authentication checks
will be performed.
IP Address
N/A
N/A
recording destination1: 192.168.1.50
recording destination2: 192.168.1.51
recording destination3: 192.168.1.52
recording destination4: 192.168.1.53
recording destination5: 192.168.1.54
recording destination6: 192.168.1.55
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Specifies how often (in seconds) the periodic beep tone (notifying
users that their call is being recorded) should be played.
Integer
15 (seconds)
0 (Disabled)
15
30
45
60
recording periodic beep: 30
Additional Information
23