Mitel 6800i Series Release Notes page 71

ISSUE NUMBER
User Interface
ENH38512
ENH38752
DEF22680/CLN37178
DEF30185/CLN38842
DEF30928/CLN34678
DEF35387
DEF37204
DEF37796
DEF38105
DEF38273/DEF38274
DEF38527
DEF38662/DEF39207
DEF38928
DEF39001
DESCRIPTION OF FIX
6865i, 6867i, and 6869i: When the phone received a NOTIFY for a BLF with
the state defined as "early" and the direction defined as "initiator", the LED
for the BLF key was yellow and incorrectly blinking. This issue has been
fixed and the key is now correctly displayed as solid red.
When using the Visitor Desk Phone (VDP) feature, an "Authorizing..."
message is now displayed on screen after a user submits his/her login
credentials. This message has been added to inform users that the login is
in progress.
When using the phones with an Asterisk call manager, users were unable
to complete a call park (with static configuration) by placing the handset on
hook. This issue has been corrected.
6863i and 6865i: An issue was observed whereby users could not add the
plus (i.e. "+") sign to a number corresponding to a Directory entry using the
phone's keypad. This issue has been resolved.
Users were unable to hold an active call when a secondary call was
incoming unless they manually changed the line focus. This issue has been
resolved and users can now simply press the hold button to hold the initial
active call in such scenarios.
6865: When a Call Forward key was pressed and changes were made, if a
user pressed the Done key and then the "0" key to cancel, the phone did
not go back to the idle screen as expected. This issue has been resolved.
With an active call on Line 1 and an incoming call on Line 2, pressing the
L1 key when the incoming ring tone was playing caused a continuous ring
tone to be played. This issue has been corrected.
6863i and 6865i: In previous releases, the timer for active calls was being
displayed in 12-hour format for the 6863i and 6865i. This has been changed
to 24-hour format starting with Release 4.0.0 SP1.
6865i with M680i Expansion Module: When used with the MiVoice Office
400 call manager, BLF/List keys were being configured on the phone in the
reverse order from the order defined in the NOTIFY sent from the call
manager. This issue has been fixed.
Conference and transfer issues were observed in certain scenarios where
a user on an active call attempted to use a Sprecode key to initiate a second
call (e.g. to a parking application). These issues have been fixed.
6863i and 6865i: Users are now able to dial out using the
an entry is selected in the Directory, Callers, and Redial Lists.
Issues was observed whereby duplicate entries in the Directory were not
being removed as expected. This issue has been corrected.
The Speed Dial Edit menu was incorrectly accessible even when the
"speeddial edit" parameter was defined as "0" (i.e. disabled). This issue has
been resolved.
6865i: When utilizing the active VoIP recording feature, the recording icon
was not being displayed on screen during a recorded call. This issue has
been fixed.
Issues Resolved in Release 4.0.0 SP1
button when
67