Dhcp Option 120 Support; Ui Features; Usb Headset Support; Broadsoft Xsi Speed Dial 8 Support - Mitel 6800i Series Release Notes

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes
FEATURE

DHCP Option 120 Support

(For Administrators)

UI Features

USB Headset Support

(For Administrators and Users)
BroadSoft XSI Speed Dial 8
Support
(For Administrators and Users)

BroadSoft XSI Call Log Support

(For Administrators and Users)

Directory Search Support

(For Users)
Configurable Behavior for Incoming
Multicast Paging During the Dialing
State
(For Administrators and Users)
6
DESCRIPTION
DHCP Option 120 (as referenced in RFC 3361) allows SIP clients
to locate a local SIP server (i.e. outbound proxy server) that can
be used for all outbound SIP requests. Using the "use dhcp
option 120" configuration parameter, administrators can now
enable support for DHCP Option 120 on the 6800i SIP phones.
*New for all phones.
Release 4.0.0 SP1 introduces USB headset support for the Mitel
6867i and 6869i SIP phones. Users can simply plug in the
supported USB headset into the USB port of their phones and
configure the phone's audio mode accordingly to start using the
headset.
*New for the 6867i and 6869i.
Release 4.0.0 SP1 introduces interoperability support for the
BroadSoft XSI Speed Dial 8 service on the 6863i and 6865i SIP
phones. When the respective speed dial information is configured
on the BroadSoft BroadWorks call manager and the phone is
configured for XSI interoperability, users can simply place an
outgoing call to a speed dial number by pressing the Speed Dial
8 programmable key, selecting the desired number, and dialing
out.
*New for the 6863i and 6865i.
In addition to Speed Dial 8 support, Release 4.0.0 SP1 introduces
interoperability support for the BroadSoft XSI Call Log service on
the 6863i and 6865i SIP phones. When configured on the
BroadSoft BroadWorks call manager and enabled on the phone,
the phone's native Callers List and Redial List are replaced with
call information provided by the XSI server.
*New for the 6863i and 6865i.
6863i and 6865i SIP phone users are now able to perform
Directory entry searches. After entering the search term, the
phone will apply the search to all enabled Directory sources, and
provide the user with a consolidated list of entries.
*New for the 6863i and 6865i.
The Incoming Intercom Barge In setting is now applicable to
incoming multicast paging calls. If a user is in a dialing state with
the Barge In feature enabled and a multicast page is received by
the phone, the phone will automatically switch focus to the
multicast page screen. If a user is in a dialing state with the Barge
In feature disabled and a multicast page is received by the phone,
the phone will keep its focus on the dialing screen.
*New for the 6867i and 6869i.