Mitel 6800i Series Release Notes page 28

Mitel 6800i Series SIP Phones 4.0.0 SP1 Release Notes
The "sip execassist fac initiate call" parameter is used to specify the FAC that is used by
Assistants to initiate a call on behalf of the Executive. The FAC should correspond to the value
configured for the "Executive-Assistant Initiate Call" setting defined in the BroadSoft Web portal.
Configuring the Filter Call Prefix and Call Push and Initiate Call FACs
Use the following parameter to configure the filter call prefix and call push FAC:
PARAMETER
sip execassist filter call
prefix
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
PARAMETER
sip execassist fac call
push
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
24
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the prefix of the Alerting Custom Calling Line ID name configured
for Executives. For an incoming call, the phone will treat the call as a filtered
call if the prefix is found in the front of the display name of the FROM header
of the INVITE. The prefix from the display name of the FROM header or PAI
header will be stripped before it is displayed on the phone's screen.
For example, if the From header sent by the BroadWorks call manager SIP
INVITE message is:
From:"[F] Filtrage -> Dupont, Francois"<sip:5551234567@as.
aastra.com;user=phone>
then the IP phone displays the calling name as "Filtrage -> Dupont,
Francois" since the "[F]" prefix is removed.
String (in quotations)
"[F]"
N/A
sip execassist filter call prefix: "[F]"
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
Specifies the Feature Access Code (FAC) for the BroadSoft Executive-
Assistant Call Push feature.
String (in quotations)
"#63"
N/A
sip execassist fac call push: "#63"