XYZ Printing da Vinci 1.0 Product Manual page 7

Service Code Informations
Troubleshooting (Q&A)
For further information and instruction of the service code, please refer to :
http://support.xyzprinting.com/manuals
Display Panel Description
Service Code
0 0 1 0
Extruder or heated bed higher/lower than maximum/minimum temperature during printing
0 0 1 1 Extruder or heated bed cannot heat to the specified temperature
0 0 1 3
The temperature of heated bed reach to warning range limited
0 0 1 4
The temperature of extruder reach to warning range limited
X axis motor failed results moving failed or X axis home sensor failed results home
0 0 3 0
detect failed
Y axis motor failed results moving failed or Y axis home sensor failed results home
0 0 3 1
detect failed
Z axis motor failed results moving failed or Z axis home sensor failed results home
0 0 3 2
detect failed
0 0 4 0
Memory storage cannot read/write
0 0 5 0
Flashrom cannot read/write
Note
Please retain all original packaging material and please ship your product with the original packaging for
warranty purpose. Shipping without original packaging material may cause product damaged during the
shipment and may cause chargeable service fees.
ENG
-7-