Advertisement
ASSEMBLY INSTRUCTIONS
16
CI
CJ
17
Hang the grease cup hook (CI) from the bottom
of the burner box (BA), and place grease cup (CJ)
into position.
PROPANE MODEL SHOWN
CAUTION
Failure to assemble grease cup hook and grease
cup will cause hot grease to drip from the
bottom of the BBQ burner box, with the risk of
fi re, property damage, or personal injury.
PROPANE MODEL ONLY
a. Propane tank collar must face to the front of
the BBQ. Loosen the wing nut from the tank
retainer clip (EK). Set bottom of the tank into
notches located on the bottom of the left cart
side panel (DB). Position tank retainer clip (EK)
onto tank collar and tighten wing nut.
ATTENTION: LP Cylinder is sold separately.
Use only LP tanks that are equipped with an
OPD (Overfi ll protection device). Fill and Leak
check before attaching to the BBQ hose and
regulator. See Safe Use and Care Manual, leak
test procedure for more information
CAUTION
Cylinder valve must face to the front of cart
once the tank is attached.
Failure to install cylinder correctly may allow
gas hose to be damaged in operation, resulting
in fi re.
WARNING
Always keep LP cylinder in upright position
during use, transport and storage.
16
ASSEMBLY INSTRUCTIONS
18
CE
19
NATURAL GAS MODELS ONLY
Attach the natural gas hose (CE) to the side
burner valve fi tting, as shown.
ATTENTION: In order to complete installation
of your natural gas BBQ a 1/2" or 3/8" adapter
may be required to connect your BBQ's natural
gas hose to your home gas supply. Contact your
natural gas supplier to purchase the necessary
part.
Electronic ignition battery not included.
Unscrew the electronic ignition button (CH2) and
insert one AA battery into the electronic ignition
battery compartment (CH1), with the positive
end facing outward.
17
Advertisement
